Early TK series: TK710; TK700

Uses two station printer
NiCad Battery soldered to Main Board (to be replaced by a technician only)
Two rolls of 1 inch paper

MAC – machine all clear
1. Unplug cash register from outlet
2. Reset within Printer area
3. Remove small cover over 7,8,9 keys with Phillips head (+) screwdriver
4. Push initialization switch to ON position
5. Plug cash register into outlet and turn mode switch to REG
6. Place initialization switch to OFF position
7. Replace cover and tighten screw carefully

General machine features 1

Subtotal
101
ERR COR
Subtotal

General machine features 2 

Subtotal 
700
CH
Subtotal

Tax adjustment for Percent

Discount Key

Subtotal
3 (to adjust tax)
%
Subtotal

Enter tax rate

Subtotal
#/NS
825 (8.25%)
#/NS
0
#/NS
5002
#/NS
#/NS